Páginas Mundiales
Lower operating and maintenance costs are only two of the many benefits of the new Dulcodes S UV system. It is a further addition to the existing range and is used specifically for the photochemical degradation of bonded chlorine (chloramine) in the treatment of swimming pool water.
Más
Capacity range: 1.0 - 30,6 l/h, 10 - 2 bar Motor driven diaphragm metering pump designed for simple operations. It is especially suited to continuous dosing.
The new electronics in the Beta® solenoid metering pump results in increased energy efficiency compared to the predecessor model.
ProMinent has added to its range of peristaltic pumps for low, medium and high delivery rates.
New metering heads comply with the most stringent hygienic requirements. Dependent on required capacity range motor- or solenoid-driven metering pumps will be employed. The proven Sigma motorised metering pumps and delta® diaphragm metering pumps with regulated solenoid drive form the basis of the pumps.
The motor pumps of the Sigma series are equipped with a patented multilayer safety diaphragm and a visual diaphragm rupture indicator. The multilayer safety diaphragm guarantees that no leakages to the outside occur if the diaphragm ruptures.
In addition to safety aspects, new standards are set in terms of size with the newly developed TriPower MF process diaphragm pump.
Ready-for-use, assembled, automatic 3-chamber preparation system for powdery flocculants to prepare a 0.05 - 0.5 % polymer solution.
In POLYMORE polymer preparation and metering systems, peristaltic pumps are used to deliver liquid polymer into a multi-zone mixing facility to the diluting water and are then processed into a homogeneous polymer solution.
The disinfection controller combines a measurement and control unit with sensors and actuators for the first time in drinking water treatment applications. The disinfection controller is specially built to deal with the specific requirements in drinking water treatment processes and, combined with various measurement and actuator modules, it is designed for flexible use.
This newly developed type D1Cb basic single-channel measurement and control unit can be used in drinking water, cooling water and boiler feed water treatment applications. The basic D1Cb is equipped for all the main measurement variables encountered in water treatment applications and features a calibration logbook.
Protection against corrosion and deposits in the cooling plant. Maximum efficiency of the cooling plant. Reduction of the chemicals need to a minimum.
The cooling tower controller AQUATRAC® Multiflex M10 can simultaneously control up to four cooling circuits or steam generators. All required functions such as conductivity-dependent desalination control, metering of two biocides and one inhibitor as well as the monitoring of the entire process can be implemented.
The new sensor type CLO 2 serves the monitoring of the disinfection parameter “free chlorine” in hot water circuits of up to 70 °C and at pressures of up to 8 bar. As compared to conventional systems, this becomes possible by returning the media to the process line. The water consumption can thus be reduced.
The design of the new chlorine dioxide sensor CDR 1- was modified such that it can be used especially also in polluted industrial, process and waste water as well as in cooling water applications or surfactant-polluted waters and also in irrigation waters for agriculture.
Its lower energy and cooling water consumption and compact design are key features of the new ozone generation plant OZONFILT® OZMa that generates 70 to 245 g of ozone per hour from compressed air or oxygen. The ozone volume can be set reproducibly and independently of voltage and pressure fluctuations.
Safely and cleanly into the future - chlorine dioxide systems Bello Zon® CDVc and CDKc are wired ready for connection and are used for the production, metering and monitoring of 20 to 7,500 g/h of chlorine dioxide. An innovative and completely newly developed reactor concept ensures the efficient production and metering of chlorine dioxide.
The extremely economic and compact chlorine dioxide plants SVP-Pure® produce and meter up to 200 kg/h of chlorine dioxide in a closed control cabinet.
The new electrolysis plants are a highly economic and at the same time a safe alternative to the storage or transportation of hazardous chemicals. The plants with economical salt and energy consumption are available as tubular cell electrolysis or as membrane electrolysis plant.
The reverse osmosis systems are equipped with the latest generation of ultra low pressure diaphragms. As a result, the systems achieve maximum permeate output at low operating pressures, thus keeping investment and operating costs low.
Dulcoclean® UF eco systems offer state-of-the-art ultrafiltration technology for removing all pathogens and turbidity in water. Integrated automatic diaphragm monitoring and user-friendly remote control ensure the compact small-scales systems effectively achieve an output rate of up to 3.9 m3/h with maximum safety and reliability.
ecoPRO reverse osmosis systems offer high efficiency and outstanding price/performance ratio. Demineralised drinking water is indispensable in many processes where it is used as boiler feed water, pure water for flushing and cleaning applications or as production water.